SunFire X4200 Configuration
With the built in RAID controller when the machine is booting up hit the
Ctrl+C to start the LSI Logic Configuration Utiltiy.
This link explains the different screens and how to configure the
striping and mirroring.
http://docs.sun.com/source/819-1157-16/app-biosraid.html#pgfId-1003503
It was very simple to setup.
Dave Martini
Below is my original question
I have a new X4200 with 4 internal drives.
I haven’t worked with this hardware before but it appears there is an
internal RAID controller that can be used to strip and mirror the
internal drives. I can’t find any documentation on how to do this.
In the past I’ve used SUN’s Disksuite to strip and mirror the internal
drives but if this has a hardware RAID controller I’d like to use that.
Has anyone done this on an X4200 before or can point me to some docs.
Leave a Reply